[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
Request Information
For specific application

HOKE Gyrolok tube fittings may be used with various types of plastic tube material without any special preparation. Use tube inserts to support soft types of tubing, such as Tygon or polyvinyl chloride, prior to insertion into a HOKE Gyrolok end. See chart at lower right for recommendations.
Unit of Measure

Specifications

Description

 N/A Tube Insert

Fitting Configuration

 N/A Spare Parts

Basic Part No.

 N/A TI

Material

 N/A 316 Stainless Steel

Tube O.D.

 N/A 3/8 in

Tube I.D.

 N/A 1/4 in

Optional Materials

 N/A 600 - Inconel 6MO - 254 SMO D50 - Super Duplex 2507 DX3 - Duplex 2205 HC - Hastelloy® C-276 M - Monel TI - Titanium

Type

 N/A Tube Fittings

Dimensional Data

N/A

Usage Instruction

N/A

  1. Fully insert Tube Insert into plastic tubing, where appropriate.
  2. If using standard nut, follow standard HOKE Gyrolok assembly instructions, page 53 (Hand-tighten, then tighten 1 1/4 turns with wrench.)
  3. For finger-tight assembly, standard Brass fittings are available with knurled nuts and nylon ferrules.


 Tubing
 Material		  Front
 Ferrule		  Rear
 Ferrule		  Tube Insert Usage
 Polyethylene  Metal
 Nylon		  Metal
 Nylon		  Not normally required
 Nylon  Metal
 Nylon		  Metal
 Nylon		  Not normally required
 Teflon®  Metal
 Teflon		  Metal
 Teflon or Metal		  Not normally required
 Rigid PVC  Metal
 Teflon*		  Metal
 Teflon*		  None
 Soft Polyvinyl
 Chloride or
 Tygon		  Metal
 Nylon		  Metal
 Nylon		  Recommended



Check Valves Relief Valves
Vacuum & High Purity Fittings
Circle Seal Solenoid Valves Jefferson Solenoid Valves Atkomatic Solenoid Valves GO Regulator Cryogenic Valves & Equipment Hoke Valves Gyrolok® Tube Fittings Circle Seal Control Valves Measurement Devices Additional Products


200 Series Check Valves 0 to 3000 psig
H200 Series High Pressure Check Valves 0 to 6000 psig
2200 Series Check Valves 0 to 800 psig
2300 Series Check Valves 0 to 10000 psig
C200 Series Cartridge Check Valve 0 to 5000 psig
C2900 Series Cartridge Check Valve 0 to 3000 psig
Bivco Check Valve 0 to 120 psig
100 Series Check Valves 0 to 25 psigs
Rockwood Swendeman Relief Valves
500 Series Relief Valves 0.5 to 150 psig
HP500 Series Relief Valves 150 to 575 psig
5100 Series Relief Valves 10 to 2400 psig
D500 Series ASME Safety Relief Valves 15 to 150 psig
M5100 Series ASME Relief Valves 20 to 1200 psig
5300 Series Relief Valves 400 to 10500 psig
R6000 Series Right Angle Relief Valves 5 to 6000 psig
Face Seal Connectors
Welded Face Seal Assemblies
Face Seal Gaskets, Nuts, Caps & Plugs
Face Seal Unions & Elbows
Face Seal Glands
Mini Weld Fittings
O-Ring Face Seal Fittings
L-Ring Face Seal Fittings
Face Seal Fittings
SV10-SV30 Series Solenoid Valves
SV400 Series Solenoid Valves
1314 Series 2-Way Solenoid Valves
1327 Series 2-Way Solenoid Valves
1335 Series 2-Way Solenoid Valves
1342 Series 2-Way Solenoid Valves
1390 Series 2-Way Solenoid Valves
1393 Series 2-Way Solenoid Valves
2026 Series 2-Way Solenoid Valves
2036 Series 2 Way Solenoid Valves
2094 Series 2-Way Solenoid Valves
15400 Series Solenoid Valves
15800 Series Solenoid Valves
30400 Series Solenoid Valves
30800 Series Solenoid Valves
1000 Series Solenoid Valves
4000/5000 Series Solenoid Valves
8000 Series Solenoid Valves
JJ Series Solenoid Valves
HS Series Solenoid Valves
6000 Series Solenoid Valves
Single Stage Pressure Regulators
Cylinder Regulators
Back Pressure Regulators
Vaporizing Regulators
Cryogenic Vacuum Jacketed Valves
Cryogenic Non-Jacketed Valves
CPC Cryogenic Valves
Vacuum Seal Off Valves & Operators
Rockwood Swendeman Relief Valves
Spare Parts, Kits and Assemblies
Bayonet Connections
Needle Valves
Ball Valves
Industrial Ball Valves
Metering Valves
Packless Valves
Check & Relief Valves
Tube to Male Thread
Tube to Female Thread
Tube to Tube Union
Tube to 37?? Flare
Tube to Weld
Cap & Plug
Tube Stub Connectors/Adapters
Spare Parts
Specific Applications
Tools & Accessories
Chromatography
900 Series Shutoff Valve 0 to 6,000 psig
9200 Series Vacuum to 150 psig Plug Shutoff Valves
9300 Series Vacuum to 150 psig Plug Valves 3-way Selector
9400 Series 0 to 3,000 psig Miniature Shutoff Valve
9500 Series 0 to 3,000 psig Shutoff Valve
400 Series Shuttle Valves 0 to 3000 PSI
Pressure Gauges
Pressure & Level Transmitters & Transducers
Temperature Measurement

 
Force Measurement
Precision Pipe Fittings
Instrumentation Quick Couplings
Filtration
Specialty Valves
Formed Sampling Cylinders
Spun Sampling Cylinders
Check Valves
Relief Valves
Solenoid Valves
Hoke® Valves
Atkomatic Solenoid Valves
Circle Seal Controls
Cryogenic Valves and Equipment
Go Regulators
Gryolok® Tube Fittings
Filtration
Precision Pipe Fittings
Connect with us:
follow us on twitter connect on linnkedin

307 Derstine Ave, Suite 204 | Lansdale, PA 19446 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved