Item # LR6032-2MP-D, R6000 Series Right Angel Relief Valves On Circle Valve Technologies Inc.

Request Information

Available in low, medium, high and extra high pressure models, R6000 right angle relief valves provide users with high accuracy and consistency of cracking and reseat pressures. Furthermore, narrow pressure ranges (cracking pressures) for each model can be factory pre-set according to customer specifications. PED certification and CE marking are standard for all models. All R6000 relief valves are offered with multiple end connections to ensure application versatility.

Low Pressure (5 - 550 psig)
Back pressure affects cracking pressure on low pressure version

Zero friction poppets

Increases accuracy of cracking pressure and reseat pressure.
Improves consistency of cracking pressure and reseat pressure.

Encapsulated Seat Seal
Maintains small contact surface area.
Protects seat from erosion due to flow.

Raised seal lip on poppet minimizes contact with seat, eliminating friction and preventing overstressing of the O-ring
6 pressure spring ranges improve accuracy
Caps and bonnets are pre-drilled for lockwire
Multiple end connections available

Unit of Measure

Specifications | Applications | Safety

Specifications

Series	N/A LR6000
Seal Material¹	N/A Viton®
Connection Size	N/A 1/4 in
Connection	N/A 1/4" Male NPT x 1/4" Female NPT
Operating Pressure	N/A 5 to 550 psig0 to 38 bar
Cracking Pressure	N/A 151 to 250 psig
Operating Temperature	N/A -20 to 400 ºF-29 to 204 ºC
Reseat Pressure	N/A 70% of CP > 10 psig 85% Min. of CP < 10 psig
Proof Pressure	N/A 1050 psig72 bar
Burst Pressure	N/A Over 2800 psigOver 193 bar
Dim. A	N/A 3.10 in
Dim. B	N/A 1.44 in
Dim. C	N/A 1 in
Optional End Connections	N/A 1/4" Male BSPT x 1/4" Female BSPT 12mm Gyrolok® x 12mm Gyrolok® 6mm Gyrolok® x 6mm Gyrolok® 8mm Gyrolok® x 8mm Gyrolok®
Weight	N/A .6 lbs

Applications

N/A Typical Applications

Beverage dispensing equipment
Gas pilot plants
Petrochemical test labs
Off shore oil platform heating lines
Pharmaceutical sterilization and packaging systems

Safety

N/A For Your Safety
It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.