For specific applications.

For specific applications.

For specific applications.

HOKE Gyrolok Calibration Fittings save time and money by reducing the time required to calibrate differential pressure transmitters. HOKE’s calibration fittings, constructed of 316 Stainless Steel, combine a straight thread and conical metal-to-metal sealing surface on one end with a 1/4" Gyrolok tube fitting on the other. This design allows the technician to easily calibrate the transmitter - in place - without removing the pipe plug/bleed port tap assemblies. No TFE tape is required. Gyrolok’s exclusive Controlled Ferrule Drive increases value - extending cycle life.

For specific applications.

The Lapped Flange Connector is used to allow safe and easy connections between process lines and instruments. The basic, one-piece unit consists of a HOKE Gyrolok tube connection end and a 1/2” lap joint pipe flange. The flange end is dimensioned to meet “ANSI 2500” flange specifications. Available in “Smooth” or “Serrated/Concentric” seal faces, and in 316 Stainless Steel or Monel.

For specific applications.

The HOKE Gyrolok Dielectric Tube Fittings are for use in applications where electrical current flowing through a pipe or tube line must be interrupted to protect vital instrumentation and metering equipment.

For specific applications.

The HOKE Gyrolok Dielectric Tube Fittings are for use in applications where electrical current flowing through a pipe or tube line must be interrupted to protect vital instrumentation and metering equipment.