[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
To connect tube fitting together.
Unit of Measure

Specifications

Body Type

N/A Port Connector

Fitting Configuration

N/A Tube Stub Connectors/Adapters

Basic Part No.

N/A PC

Body Material

N/A Brass

Connection Size 1

N/A 3/8 in

Connection Type 1

N/A Port Connector

Connection Size 2

N/A 1/8 in

Connection Type 2

N/A Tube Adaptor

Optional Materials

N/A 600 - Inconel 6MO - 254 SMO D50 - Super Duplex 2507 DX3 - Duplex 2205 HC - Hastelloy® C-276 M - Monel TI - Titanium

Type

N/A Tube Fittings

Dimensional Data

N/A

Installation Instruction

N/A For Port Connector and Reducing Port Connector:

  1. Firmly insert machined ferrule end into fitting body.
  2. Place nut only (no ferrules) over the machined ferrule. Finger-tighten.
  3. Using wrench, turn nut until sharp rise in torque is felt. Snug tight. (Do not tighten 1 1/4 turns. No ferrules to set.)
  4. Insert tube stub end into HOKE Gyrolok assembly. Follow standard HOKE Gyrolok assembly instructions



Check Valves
Relief Valves
Vacuum & High Purity Fittings
Circle Seal Solenoid Valves
Jefferson Solenoid Valves
Atkomatic Solenoid Valves
GO Regulator
Cryogenic Valves & Equipment
Hoke Valves
Gyrolok® Tube Fittings
Circle Seal Control Valves
Measurement Devices
Additional Products



1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved