[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
For specific application

HOKE Gyrolok tube fittings may be used with various types of plastic tube material without any special preparation. Use tube inserts to support soft types of tubing, such as Tygon or polyvinyl chloride, prior to insertion into a HOKE Gyrolok end. See chart at lower right for recommendations.
Unit of Measure

Specifications

Description

N/A Tube Insert

Fitting Configuration

N/A Spare Parts

Basic Part No.

N/A TI

Material

N/A 316 Stainless Steel

Tube O.D.

N/A 1/4 in

Tube I.D.

N/A 1/8 in

Optional Materials

N/A 600 - Inconel 6MO - 254 SMO D50 - Super Duplex 2507 DX3 - Duplex 2205 HC - Hastelloy® C-276 M - Monel TI - Titanium

Type

N/A Tube Fittings

Dimensional Data

N/A

Usage Instruction

N/A

  1. Fully insert Tube Insert into plastic tubing, where appropriate.
  2. If using standard nut, follow standard HOKE Gyrolok assembly instructions, page 53 (Hand-tighten, then tighten 1 1/4 turns with wrench.)
  3. For finger-tight assembly, standard Brass fittings are available with knurled nuts and nylon ferrules.


 Tubing
 Material
 Front
 Ferrule
 Rear
 Ferrule
 Tube Insert Usage
 Polyethylene  Metal
 Nylon
 Metal
 Nylon
 Not normally required
 Nylon  Metal
 Nylon
 Metal
 Nylon
 Not normally required
 Teflon®  Metal
 Teflon
 Metal
 Teflon or Metal
 Not normally required
 Rigid PVC  Metal
 Teflon*
 Metal
 Teflon*
 None
 Soft Polyvinyl
 Chloride or
 Tygon
 Metal
 Nylon
 Metal
 Nylon
 Recommended



Check Valves
Relief Valves
Vacuum & High Purity Fittings
Circle Seal Solenoid Valves
Jefferson Solenoid Valves
Atkomatic Solenoid Valves
GO Regulator
Cryogenic Valves & Equipment
Hoke Valves
Gyrolok® Tube Fittings
Circle Seal Control Valves
Measurement Devices
Additional Products



1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved