[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
The PR-7 Series has been designed for those applications using high gas flow rates while still requiring a compact package. In addition, this unit will handle hydrogen flows up to 1000 liters per minute with none of the resonance problems typical with many regulators attempting such an application.

While designed for gas flow applications with low inlet pressures and low differential pressures, this valve has been constructed to withstand inlet pressures up to 3600 psig. With capability of holding outlet pressures closely with large changes of flow requirements, this valve is very suitable as a primary pressure supply to other pressure regulators located downstream.

Features & Specifications
  • Minimal droop with large flow increased
  • No resonance with large hydrogen flows
  • Stainless steel diaphragm
  • 316L stainless steel or brass construction (optional Hastelloy®, Monel®, or chrome-plated brass)
  • T-handle adjusting assembly for easier adjustment in the 250 and 500 psig ranges
  • Material of construction: brass, stainless steel, Viton®, Teflon®, PEEK™, or Kalrez®
  • Stainless steel cap
  • Cv flow coefficient = 1.1 (full Cv with 1/2" ported unit only)
  • Operating temperatures up to +250° F (+121° C)
  • Maximum inlet pressure of 3600 psig with PEEK™ seat
  • Inlet/outlet connections: 1/4", 3/8", or 1/2" FNPT
  • Outlet pressure ranges of: 0 - 10, 0 - 25, 0 - 50, 0 - 100, 0 - 250 & 0 - 500 psig
Unit of Measure

Specifications

Body Material

N/A 316L Stainless Steel

Seat Material

N/A Viton®

Max. Operating Pressure

N/A 300 psig

Operating Temperature

N/A -40 to 121 ºC-40 to 250 ºF

Outlet Range

N/A 0 to 50 psig

Flow Coefficient (Cv)

N/A 1.10

Process Port Type

N/A 1/4" FNPT

Port Configuration

N/A Standard

Diaphragm Type

N/A Non-self-relieving

Diaphragm Facing Material

N/A Teflon®

Diaphragm Backing Material

N/A Stainless Steel

Cap Assembly

N/A T-handle, stainless steel

Surface Finish of Diaphragm Cavity

N/A < 25 Ra, Standard

Weight

N/A 3.2 lbs

Options

N/A

  • Self-relieving
  • Panel mount
  • Captured vent



Check Valves
Relief Valves
Vacuum & High Purity Fittings
Circle Seal Solenoid Valves
Jefferson Solenoid Valves
Atkomatic Solenoid Valves
GO Regulator
Cryogenic Valves & Equipment
Hoke Valves
Gyrolok® Tube Fittings
Circle Seal Control Valves
Measurement Devices
Additional Products



1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved