[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
The PR-1 Series is a versatile pressure reducing regulator designed to fulfill a wide range of needs in instrumentation sample systems and other applications such as semiconductor processing gases. Many features of the PR-1 make it ideal for a wide range of applications controlling pressures at low to moderate flows in gas or liquid service. 316L body material is used to facilitate welded connections. Stainless steel caps and adjusting screws prevent atmospheric corrosion and maintain appearance. Enhanced internal body surface finish of better than 25 Ra plus electropolishing allows easier cleaning and potentially less particle contamination in the flow stream.

Five different seat materials, three alternate orifice sizes and seven pressure control ranges with stainless diaphragms offer the user a wide spectrum of capabilities for pressure control with inlet pressures up to 6000 psig and standard operating temperatures up to 500º F (260º C).

Features & Specifications
  • Gas or liquid service
  • 316L stainless steel, Inconel®, Teflon®, and Tefzel® (or optional main seat material choice) only in flow stream
  • Electropolished 316L body with better than 25 Ra diaphragm cavity surface finish
  • Stainless steel cap with SS adjusting screw
  • Inlet pressures of up to 6000 psi
  • Adjustable outlet pressure ranges of 0 - 10, 0 - 25, 0 - 50, 0 - 100, 0 - 250, 0 - 500 and 0 - 750 psig
  • Operating temperatures of - 40º F up to +500º F (-40º C up to +260º C)
  • 20 micron filters
  • Bubble-tight shutoff under most conditions
  • Cv flow coefficients 0.025, 0.06, 0.20, and 0.50 (0.06 standard)
Unit of Measure

Specifications

Body Material

N/A 316L Stainless Steel

Seat Material

N/A Tefzel®

Max. Operating Pressure

N/A 3600 psig

Operating Temperature

N/A -40 to 66 ºC-40 to 150 ºF

Outlet Range

N/A 0 to 25 psig

Flow Coefficient (Cv)

N/A 0.06

Process Port Type

N/A 1/4" FNPT standard (1/4" FNPT gauge ports)

Port Configuration

N/A Standard

Diaphragm Type

N/A Standard diaphragm

Diaphragm Facing Material

N/A Teflon®

Diaphragm Backing Material

N/A Stainless Steel

Cap Assembly

N/A Standard, stainless steel

Surface Finish of Diaphragm Cavity

N/A < 25 Ra, Standard

Weight

N/A 1.9 lbs

Options

N/A

  • Wetted materials of construction: Monel®, Hastelloy®, and titanium
  • Diaphragm attached poppet
  • Special fittings
  • Diaphragm assist spring for vacuum purging
  • Panel mount (1 3/8" mounting hole)
  • Relief valves
  • Special diaphragm assembly for water service
  • SS inlet pressure gauges
  • SS outlet pressure gauges
  • Base-mounting brackets
  • Captured vent
  • Self-relieving



Check Valves
Relief Valves
Vacuum & High Purity Fittings
Circle Seal Solenoid Valves
Jefferson Solenoid Valves
Atkomatic Solenoid Valves
GO Regulator
Cryogenic Valves & Equipment
Hoke Valves
Gyrolok® Tube Fittings
Circle Seal Control Valves
Measurement Devices
Additional Products



1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved