[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
Features
  • Set Pressures to 400 psig
  • Temperature -423°F to +400°F
  • Special Teflon® seat, making bubble-tight seals possible for over 90% of set pressures per spec API 527; not applicable to steam.
  • Adjustable blow down ring.
  • Cleaned and packaged for use in oxygen service in compliance with CGA specification G-4.1
  • Electropolishing of base and proper assembly for high purity and electronic applications.
Unit of Measure

Specifications

Series

N/A 765

Valve Service

N/A Air/Gas Sec. VIII

Certification

N/A PED

Body Material

N/A 316 Stainless Steel

Seal Material

N/A Teflon®

Cap Type

N/A Plain Cap

Inlet

N/A 3/4" MNPT

Outlet

N/A 3/4" Female NPT

Orifice

N/A .75 in

Cracking Pressure

N/A 15 to 400 psig

Operating Pressure

N/A 400 psig

Operating Temperature

N/A -423 to 400 ºF

Dimension A - Overall Height

N/A 5.905 in

Dimension B - Outlet Height

N/A 2.565 in

Dimension C - Outlet Width

N/A 1.34 in

Weight

N/A 2 lbs

Applications

N/A

  • Especially recommended where corrosive or expensive liquids or gases place a premium on seal quality.
  • Stationary Cryogenic storage tanks
  • Dual Safety relief systems
  • Overpressure relief of tanks, pipelines, vessels, pumps
  • Air and gas compressors

  • Materials of Construction

    N/A

  • Shell - Investment Cast 316SS, ASME SA-351
  • Base - Investment Cast 316SS, ASME SA-351
  • Trim - ASME SA-479
  • Spring - Stainless Steel, 17-7 PH ASTM, A-313,Type 631

  • Safety

    N/A For Your Safety
    It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.



    Check Valves
    Relief Valves
    Vacuum & High Purity Fittings
    Circle Seal Solenoid Valves
    Jefferson Solenoid Valves
    Atkomatic Solenoid Valves
    GO Regulator
    Cryogenic Valves & Equipment
    Hoke Valves
    Gyrolok® Tube Fittings
    Circle Seal Control Valves
    Measurement Devices
    Additional Products



    1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
    Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved