[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
Available in low, medium, high and extra high pressure models, R6000 right angle relief valves provide users with high accuracy and consistency of cracking and reseat pressures. Furthermore, narrow pressure ranges (cracking pressures) for each model can be factory pre-set according to customer specifications. PED certification and CE marking are standard for all models. All R6000 relief valves are offered with multiple end connections to ensure application versatility.

Low Pressure (5 - 550 psig)
Back pressure affects cracking pressure on low pressure version

Zero friction poppets
  • Increases accuracy of cracking pressure and reseat pressure.
  • Improves consistency of cracking pressure and reseat pressure.

    Encapsulated Seat Seal
  • Maintains small contact surface area.
  • Protects seat from erosion due to flow.

    Raised seal lip on poppet minimizes contact with seat, eliminating friction and preventing overstressing of the O-ring
    6 pressure spring ranges improve accuracy
    Caps and bonnets are pre-drilled for lockwire
    Multiple end connections available
  • Unit of Measure

    Specifications

    Series

    N/A LR6000
    Seal Material1 N/A Buna N

    Connection Size

    N/A 1/4 in

    Connection

    N/A 1/4" Male NPT x 1/4" Female NPT

    Operating Pressure

    N/A 5 to 550 psig0 to 38 bar

    Cracking Pressure

    N/A 5 to 25 psig

    Operating Temperature

    N/A -65 to 275 ºF-54 to 135 ºC

    Reseat Pressure

    N/A 70% of CP > 10 psig 85% Min. of CP < 10 psig

    Proof Pressure

    N/A 1050 psig72 bar

    Burst Pressure

    N/A Over 2800 psigOver 193 bar

    Dim. A

    N/A 3.10 in

    Dim. B

    N/A 1.44 in

    Dim. C

    N/A 1 in

    Optional End Connections

    N/A 1/4" Male BSPT x 1/4" Female BSPT 12mm Gyrolok® x 12mm Gyrolok® 6mm Gyrolok® x 6mm Gyrolok® 8mm Gyrolok® x 8mm Gyrolok®

    Weight

    N/A .6 lbs

    Applications

    N/A Typical Applications

    • Beverage dispensing equipment
    • Gas pilot plants
    • Petrochemical test labs
    • Off shore oil platform heating lines
    • Pharmaceutical sterilization and packaging systems

    Safety

    N/A For Your Safety
    It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.

    • 1 Slicone seals for MR series only available up to 350 psig (Spring Code B)
      Slicone seals for MR series only available up to 300 psig (Spring Code A)


    Check Valves
    Relief Valves
    Vacuum & High Purity Fittings
    Circle Seal Solenoid Valves
    Jefferson Solenoid Valves
    Atkomatic Solenoid Valves
    GO Regulator
    Cryogenic Valves & Equipment
    Hoke Valves
    Gyrolok® Tube Fittings
    Circle Seal Control Valves
    Measurement Devices
    Additional Products



    1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
    Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved