[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
The HPR-2 Series heated pressure regulator is designed to supply heat to samples entering instrumentation systems. It can be used to preheat liquids, to prevent condensation of gases or to vaporize liquids prior to gas analysis. The modular design of the HPR-2 consists of heat exchanger and pressure control sections. The pressure control section is patterned after the time-proven design of the PR-1 pressure reducing regulator and provides the same excellent outlet pressure stability. The heat exchanger section is made up of a body and heat exchange element. The heat exchange element uses GO Regulator's unique spiral-wrapped screen as the heat exchanger surface. This screen has up to 100 square inches of heat transfer area and precise design forces all sample flow to pass through the element.
Unit of Measure

Specifications

Body Material

N/A 316L Stainless Steel

Seat Material

N/A Polyimide

Temperature/Pressure

N/A 380° F@3600 psig

Inlet

N/A 1/8" FNPT

Outlet

N/A 1/4" Female NPT

Max. Operating Pressure

N/A 3600 psig

Heater Wattage

N/A Steam

Max. Temperature

N/A 193 ºC380 ºF

Outlet Range

N/A 0 to 100 psig

Flow Coefficient (Cv)

N/A 0.06

Heater Block Porting

N/A Standard

Heater Block Type

N/A Steam

Port Configuration

N/A Z

Cap Assembly

N/A Tamper-proof, standard, stainless steal

Surface Finish of Diaphragm Cavity

N/A < 25 Ra, Standard

Applications

N/A Analytical process sample conditioning systems:
  • Petro chemical refineries
  • Chemical production facilities
  • Pilot plants (chemical & petro chemical)
  • LNG loading and off-loading points
  • Natural gas pipeline sampling
  • Features & Benefits

    N/A
  • Optional Hastelloy® C and Monel®
  • Electropolished body with better than 25 Ra finishin diaphragm cavity for an optimal sealing surface
  • Bubble-tight shutoff
  • Modular pressure control and heat exchangerassemblies allow for easy maintenance
  • Unique spiral-wrapped heat exchange elementprovides up to 100 square inches of heat transfer area.


    Check Valves
    Relief Valves
    Vacuum & High Purity Fittings
    Circle Seal Solenoid Valves
    Jefferson Solenoid Valves
    Atkomatic Solenoid Valves
    GO Regulator
    Cryogenic Valves & Equipment
    Hoke Valves
    Gyrolok® Tube Fittings
    Circle Seal Control Valves
    Measurement Devices
    Additional Products



    1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
    Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved