[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
Features
  • Designed for high pressure service
  • Resilient O-ring
  • Single piece design
Benefits
  • Less susceptible to contamination damage
  • Zero leakage at normal back pressure
  • Automatic compensation for wear
  • Cushioned, quiet closing
Unit of Measure

Specifications

Series

N/A 2300
Body Material1 N/A Brass

O-Ring Material

N/A Viton®

Connection Size

N/A 1/4 in

End Connections (Inlet/Outlet)

N/A Female / Female NPT

Operating Pressure

N/A 0 to 5000 psig0 to 345 bar

Cracking Pressure

N/A 0.5 to 1.5 psig

Available Cracking Pressures

N/A 0.5 to 30 psi

Operating Temperature

N/A -20 to 400 ºF

Flow Coefficient (Cv)

N/A 0.76

Spring Material

N/A 302 Stainless Steel

Proof Pressure

N/A 7500 psig517 bar

Rated Burst Pressure

N/A 12500 psig862 bar

B Hex.

N/A 0.813 in

Dim. C

N/A 2 in

Dim. G

N/A 0.41 in

Dim. F

N/A 0.77 in

Optional Body Material

N/A 17-4 PH Stainless Stee 2024–T4/T351 aluminum 303 stainless steel 316 Stainless Steel Brass

Optional End Connections

N/A B - Female Tube, AND10050 M - Male NPT S - British Taper Pipe (Male) X - British Taper Pipe (Female)

Leakage

N/A

  • 2362, 2332, 2359 Series -
  • Zero @ 1 psig to proof
  • 2333, 2349 Series -
  • Zero @ 3 psig to proof
  • 2320 Series -
  • Zero @ 75 psig to proof

    Flow Rates

    N/A

    Valve Size Tube -4BB -6BB   -8BB, -10BB -12BB
    Pipe -1PP -2PP -3PP -4PP -6PP
    Cv (nominal) 0.31 0.76 1.78 2.82 5.11

    Safety

    N/A For Your Safety
    It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.

    • 1 For PED applications, brass bodies are limited to a maximum temperature of +100°F (+38°C), aluminum bodies are limited to a maximum temperature of +200°F (+93°C)


    Check Valves
    Relief Valves
    Truelok® Face Seal & Mini Fittings
    Circle Seal Solenoid Valves
    Jefferson Solenoid Valves
    Atkomatic Solenoid Valves
    GO Regulator
    Cryogenic Valves & Equipment
    Hoke Valves
    Gyrolok® Tube Fittings
    Circle Seal Control Valves
    Measurement Devices
    Additional Products


    6000 Series Solenoid Valves

    1533 Gehman Road | Harleysville, PA 19438 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
    Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved