The HPR-2 Series heated pressure regulator is designed to supply heat to samples entering instrumentation systems. It can be used to preheat liquids, to prevent condensation of gases or to vaporize liquids prior to gas analysis. The modular design of the HPR-2 consists of heat exchanger and pressure control sections. The pressure control section is patterned after the time-proven design of the PR-1 pressure reducing regulator and provides the same excellent outlet pressure stability. The heat exchanger section is made up of a body and heat exchange element. The heat exchange element uses GO Regulator's unique spiral-wrapped screen as the heat exchanger surface. This screen has up to 100 square inches of heat transfer area and precise design forces all sample flow to pass through the element.
Unit of Measure
Specifications
Body Material |
N/A 316L Stainless Steel |
Seat Material |
N/A
PEEK® |
Temperature/Pressure |
N/A 380° F@3600 psig |
Inlet |
N/A 1/8" FNPT |
Outlet |
N/A 1/4" Female NPT |
Max. Operating Pressure |
N/A 3600 psig |
Max. Temperature |
N/A 193 ºC380 ºF |
Heater Wattage |
N/A 150W |
Outlet Range |
N/A 0 to 50 psig |
Flow Coefficient (Cv) |
N/A 0.06 |
Heater Block Porting |
N/A Standard |
Heater Block Type |
N/A 120 VAC |
Special Characteristics |
N/A Includes required TCO Thermister |
Port Configuration |
N/A L |
Cap Assembly |
N/A Tamper-proof, standard, stainless steal |
Surface Finish of Diaphragm Cavity |
N/A < 25 Ra, Standard |
Certification |
N/A CSA and ATEX Approved |
Applications |
N/A
Analytical process sample conditioning systems: |
Features & Benefits |
N/A
|
.jpg)
