[email protected]
800-645-6733
Home About Us Line Card Careers Products Contact Us
[email protected] 800-645-6733
Home
About Us
Products
Line Card
Careers
Blog
Contact Us
Stainless Steel, Semi-direct Lift, Pressure 0 to 1500 psig (104 bar) Medium Pressure Valve Configurable for Variety of Fluid Applications

Features
  • Stainless steel construction on all wetted parts: 316 for barstock parts and CF8M for cast parts.
  • Plunger material is 416 stainless that is treated for increased corrosion resistance
  • Semi-direct lift action for operation down to zero pressure differential
  • Normally closed operation
  • Operation up to 1500 psi (104 bar)
  • Media temperatures from - 423º F to +500º F (-253º C to +260º C)
  • Will handle fluids with viscosity up to 150 SUS
  • Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and corrosive fluids
  • Optional pilot and piston seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or 316 stainless steel depending on fluid type and pressure
  • Body seal materials of Teflon®, Viton®, Buna N, or EPR
  • Pipe sizes from 1/4" through 1" NPT
  • British BSPT ports are available
  • Full ported valves: Cv from 1.1 through 12.5
  • Removable 316 stainless steel body inserts (stainless steel trim)
  • Class H coils standard
  • Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7
  • Manual opening device is available as an option
  • Valve position indicator option is available
  • Unit of Measure

    Specifications

    Series

    N/A 15800

    Fluid Media Type

    N/A Gas

    Body Material

    N/A Stainless Steel

    Seat & Seal Material

    N/A Teflon®

    Position of Valve (DE-Energized)

    N/A Normally Closed

    Connection Size

    N/A 1/2 in

    Main Seat Orifice

    N/A .75 in

    Connection Type

    N/A Female NPT

    Operating Pressure

    N/A 0 to 1500 psig0 to 104 bar

    Temperature Range

    N/A -423 to 500 ºF-253 to 260 ºC

    Cv

    N/A 5.10

    Voltage

    N/A 115 VAC

    Coil Insulation Rating

    N/A Class H (180° C)

    Coil Type

    N/A Single Wound Molded

    Coil Housing

    N/A Standard

    Dim. X

    N/A 8.25 in

    Dim. Y

    N/A 7.125 in

    Dim. Z

    N/A 4.625 in

    Type

    N/A Solenoid Valve



    307 Derstine Ave, Suite 204 | Lansdale, PA 19446 | Phone: 267-933-6300 | Fax: 267-933-6305 | Toll Free: 800-645-6733 | Email: [email protected]
    Terms & Conditions | Catalog Index | © 2009- Circle Valve Technologies, Inc. All Rights Reserved