Circle Valve Technologies Inc.
307 Derstine Ave, Suite 204
Lansdale, PA 19446

Toll Free:800-645-6733
Phone: 267-933-6300
Fax: 267-933-6305
Email: [email protected]
Print Back
The CPR-1 Series is a compact pressure regulator with most of the same interanl desigm features employed in our time proven PR-1 Series. This regulator was designed to provide optimum performance as a "lecture bottel" regulator" for pressure control in any application where a small size and low internal volume are required. The low volume allows more rapid purging in analytical instrumentaion and semiconductor doping gas applications.

Features & Specifications
  • Internal dead volume less than 4cc
  • Gas or liquid service
  • Inlet pressures of up to 6000 psi
  • Adjustable outlet pressure ranges of 0 - 10, 0 - 25, 0 - 50, 0 - 100, 0 - 250, 0 - 500 and 0 - 750 psig
  • Operating temperatures of - 40º F up to +500º F (-40º C up to +260º C)
  • Bubble-tight shutoff
  • Cv flow coefficients 0.025, 0.06, and 0.20
Unit of Measure

Specifications

Body Material

 N/A 316L Stainless Steel

Seat Material

 N/A PEEK® low temperature service (plastic knob standard)

Max. Operating Pressure

 N/A 6000 psig

Operating Temperature

 N/A -40 to 80 ºC-40 to 175 ºF

Outlet Range

 N/A 0 to 50 psig

Flow Coefficient (Cv)

 N/A 0.025

Process Port Type

 N/A 1/8" FNPT (1/8" FNPT gauge ports)

Port Configuration

 N/A Standard

Diaphragm Type

 N/A Standard, Polyimide dia. slip ring (high temperature service)

Diaphragm Facing/Backing/O-ring Material

 N/A Tefzel® Seal Ring/Stainless Steel/PTFEE O-Rng

Cap Assembly

 N/A Standard, aluminum

Surface Finish of Diaphragm Cavity

 N/A < 25 Ra, Standard