Circle Valve Technologies Inc.
1533 Gehman Road
Harleysville, PA 19438

Toll Free:800-645-6733 | Phone:267-933-6300 | Fax:267-933-6305|
email: [email protected]
All Categories > Gyrolok® Tube Fittings > Spare Parts > Gyrolok® TI Tube Inserts > Item # 12TI10BR  


Item # 12TI10BR, Gyrolok® TI Tube Insert
List Price QUOTE

For specific application

HOKE Gyrolok tube fittings may be used with various types of plastic tube material without any special preparation. Use tube inserts to support soft types of tubing, such as Tygon or polyvinyl chloride, prior to insertion into a HOKE Gyrolok end. See chart at lower right for recommendations.





Specifications  · Dimensional Data  · Usage Instruction

Specifications

Description
Tube Insert

Fitting Configuration
Spare Parts

Basic Part No.
TI

Material
Brass

Tube O.D.
3/4 in

Tube I.D.
5/8 in

Optional Materials
600 - Inconel
6MO - 254 SMO
D50 - Super Duplex 2507
DX3 - Duplex 2205
HC - Hastelloy® C-276
M - Monel
TI - Titanium

Type
Tube Fittings


Dimensional Data





Usage Instruction
  1. Fully insert Tube Insert into plastic tubing, where appropriate.
  2. If using standard nut, follow standard HOKE Gyrolok assembly instructions, page 53 (Hand-tighten, then tighten 1 1/4 turns with wrench.)
  3. For finger-tight assembly, standard Brass fittings are available with knurled nuts and nylon ferrules.


 Tubing
 Material		  Front
 Ferrule		  Rear
 Ferrule		  Tube Insert Usage
 Polyethylene  Metal
 Nylon		  Metal
 Nylon		  Not normally required
 Nylon  Metal
 Nylon		  Metal
 Nylon		  Not normally required
 Teflon®  Metal
 Teflon		  Metal
 Teflon or Metal		  Not normally required
 Rigid PVC  Metal
 Teflon*		  Metal
 Teflon*		  None
 Soft Polyvinyl
 Chloride or
 Tygon		  Metal
 Nylon		  Metal
 Nylon		  Recommended





Print Back