Print Back
Developed for high pressure, side-loading applications, the 316 stainless steel trunnion is supported and held securely in position by two composite bearings. Encapsulated Nylatron® seats provide a positive seal, resulting in leak-tight sealing between all ports to 6000 psig differential, reducing operating torque and increasing cycle life. The handle points to the side port in use; when perpendicular to the side ports, it indicates the shutoff position.
Unit of Measure

Specifications

Series

N/A 7921

Type

N/A Ball Valve

Body Style

N/A 4-Way

Body Material

N/A 316 Stainless Steel

Seat Material

N/A Nylatron®

Seat Washer Material

N/A Viton®

Inlet

N/A 1/4" Female NPT

Outlet

N/A 1/4" Female NPT

Max. Operating Pressure

N/A 6000 psig414 bar

Temperature Range

N/A 0 to 250 ºF-18 to 121 ºC

Orifice Size

N/A 4.2 mm0.166 in

Flow Coefficient (Cv)

N/A 0.54

Typical Applications

N/A

  • Actuator cycling
  • Pressure selecting and venting
  • Alternate sampling and distribution

Features & Benefits

N/A

  • Blowout-proof stem for added safety
  • Spring-loaded detent engages every 90º to indicate full port position, increasing operator confidence.
  • Trunnion bearings eliminate galling, increasing valve life and reducing cost of ownership.
  • A wide variety of HOKE Gyrolok® end fittings or pipe fittings provide the correct fitting option for the application.

Materials of Construction

N/A


  Description 2000 PSIG Models 6000 PSIG Models
1 Body 316 stainless steel 316 stainless steel
2 Trunnion 316 stainless steel 316 stainless steel
3 Stem 316 stainless steel 316 stainless steel
4 Stem packing† Viton® Viton®
5 Stem bushing 316 stainless steel 316 stainless steel
6 Seats TFE Nylatron®
7 Seat retainers 316 stainless steel 316 stainless steel
8 Seat washers† Viton® Viton®
9 Thrust washer Rulon® Nylatron®
10 Friction & wave washers Nylon & 302 stainless steel Nylon & 302 stainless steel
11 Spring & ball detent 302 stainless steel & 440 CSS 302 stainless steel & 440 CSS
12 Bearings TFE Nylon/TFE
(fiberglass filament wound
backing)
13 Handle Nylon Nylon
† Other elastomers are available upon request. Contact your local distributor.