Print Back
To connect tubing to a female thread.
Unit of Measure

Specifications

Body Type

N/A Male Connector, O-ring

Fitting Configuration

N/A Tube to Male Thread

Basic Part No.

N/A COS

Body Material

N/A Brass

Connection Size 1

N/A 3/16 in

Connection Type 1

N/A Tube Fitting

Connection Size 2

N/A 3/8-24 in

Connection Type 2

N/A Male Straight Thread

O-Ring Material

N/A Buna N

Optional Materials

N/A 600 - Inconel 6MO - 254 SMO D50 - Super Duplex 2507 DX3 - Duplex 2205 HC - Hastelloy® C-276 M - Monel TI - Titanium

Type

N/A Tube Fittings

Dimensional Data

N/A

O-Ring Installation Instructions

N/A HOKE Gyrolok O-ring seal fittings are used for direct connection to existing pipe thread or straight thread ports-which have a smooth, flat surface perpendicular to the threaded port. O-ring seal fittings provide leak-tight sealing on both vacuum and high pressure systems. In the pipe thread version, a special short thread insures against thread interference.

The standard Buna N O-ring is completely contained in a precision groove, to prevent O-ring extrusion at high pressure. The precision groove also provides a controlled squeeze for a vacuum-tight seal.

The chart lists pertinent dimensions useful with O-ring seal connectors and adapters.

Note:
When installing an O-ring port:

  1. Hand-thread until the O-ring compresses on the port end.
  2. Snug the fitting to the port with a wrench to completely compress the O-ring.
  3. Always use a back-up wrench to hold the O-ring seal fitting body, when connecting or disconnecting a HOKE Gyrolok end.