Circle Valve Technologies Inc.
307 Derstine Ave, Suite 204
Lansdale, PA 19446

Toll Free:800-645-6733
Phone: 267-933-6300
Fax: 267-933-6305
Email: [email protected]
Print Back
To connect tube fitting together.
Unit of Measure

Specifications

Body Type

 N/A Port Connector

Fitting Configuration

 N/A Tube Stub Connectors/Adapters

Basic Part No.

 N/A PC

Hoke Suffix

 N/A MM

Body Material

 N/A Brass

Connection Size 1

 N/A 10 mm

Connection Type 1

 N/A Port Connector

Connection Size 2

 N/A 8 mm

Connection Type 2

 N/A Tube Adaptor

Optional Materials

 N/A 600 - Inconel 6MO - 254 SMO D50 - Super Duplex 2507 DX3 - Duplex 2205 HC - Hastelloy® C-276 M - Monel TI - Titanium

Type

 N/A Tube Fittings

Dimensional Data

N/A

Installation Instruction

N/A For Port Connector and Reducing Port Connector:

  1. Firmly insert machined ferrule end into fitting body.
  2. Place nut only (no ferrules) over the machined ferrule. Finger-tighten.
  3. Using wrench, turn nut until sharp rise in torque is felt. Snug tight. (Do not tighten 1 1/4 turns. No ferrules to set.)
  4. Insert tube stub end into HOKE Gyrolok assembly. Follow standard HOKE Gyrolok assembly instructions