Circle Valve Technologies Inc.
307 Derstine Ave, Suite 204
Lansdale, PA 19446

Toll Free:800-645-6733
Phone: 267-933-6300
Fax: 267-933-6305
Email: [email protected]
Print Back
The HPR-2 Series heated pressure regulator is designed to supply heat to samples entering instrumentation systems. It can be used to preheat liquids, to prevent condensation of gases or to vaporize liquids prior to gas analysis. The modular design of the HPR-2 consists of heat exchanger and pressure control sections. The pressure control section is patterned after the time-proven design of the PR-1 pressure reducing regulator and provides the same excellent outlet pressure stability. The heat exchanger section is made up of a body and heat exchange element. The heat exchange element uses GO Regulator's unique spiral-wrapped screen as the heat exchanger surface. This screen has up to 100 square inches of heat transfer area and precise design forces all sample flow to pass through the element.
Unit of Measure

Specifications

Body Material

 N/A 316L Stainless Steel

Seat Material

 N/A Polyimide

Temperature/Pressure

 N/A 380° F@3600 psig

Inlet

 N/A 1/8" FNPT

Outlet

 N/A 1/4" Female NPT

Max. Operating Pressure

 N/A 3600 psig

Max. Temperature

 N/A 193 ºC380 ºF

Heater Wattage

 N/A 150W

Outlet Range

 N/A 0 to 100 psig

Flow Coefficient (Cv)

 N/A 0.06

Heater Block Porting

 N/A Standard

Heater Block Type

 N/A 120 VAC

Special Characteristics

 N/A Includes required TCO Thermister

Port Configuration

 N/A Z

Cap Assembly

 N/A Tamper-proof, panel mount, stainless steel

Surface Finish of Diaphragm Cavity

 N/A < 25 Ra, Standard

Certification

 N/A CSA and ATEX Approved

Applications

 N/A Analytical process sample conditioning systems:
  • Petro chemical refineries
  • Chemical production facilities
  • Pilot plants (chemical & petro chemical)
  • LNG loading and off-loading points
  • Natural gas pipeline sampling

    • Features & Benefits

    		 N/A
  • Optional Hastelloy® C and Monel®
  • Electropolished body with better than 25 Ra finishin diaphragm cavity for an optimal sealing surface
  • Bubble-tight shutoff
  • Modular pressure control and heat exchangerassemblies allow for easy maintenance
  • Unique spiral-wrapped heat exchange elementprovides up to 100 square inches of heat transfer area.
  • Available in 120VAC and 240VAC
  • Optional TCO heating cartridge and proportional controller.